Standard Colors for Your Underground Utilities

It is now easier to know what an underground utility line is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. Otherwise it can be something disastrous. If you hit any of the underground utility lines while digging then you can be fatally injured. Services in the area where the lines are located can experience interruption. People can call 811 to prevent these incidents, before they proceed with digging their property. Utility companies can then mark out their respective lines when you call them out.

Marking lines may lessen the risks but there are time when accidents still happen. Utility lines are struck every 6 minutes, some place. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. This has made it easier to locate utility lies underground and other important things. Companies can locate their utility lines if any property owner calls 811.

There are certain colors that mark different utility lines for easy identification. Below are some of the colors used for different utility lines.

White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.

Temporary survey markings use pink lines. Legal property boundaries are marked off by these pink lines.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. This color is appropriate for electrical works since it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. You can derail any project for a long time if you hit these lines.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.

Similar Posts